Bag fit

Measure the bag you carry.

Both depths of the Ryzer Go work across many kinds of bags. The right choice comes from measuring your specific bag at the base.

Fit is based on the bag, not what the bag was made for.

Quick size guide

One measurement gives you the answer.

Measure the loaded bag from front to back at its base, then use this chart. The written steps and fit checks below remain available if you need more detail.

Open the full-size guide
Bag fit chart for the Ryzer Go: measure the loaded bag front to back at the base. 5.5 to 8.5 inches recommends 7-inch, 8.5 to 9.5 inches fits either depth, and 9.5 to 12 inches recommends 9-inch
Step 1

Measure front to back at the base.

Measure the bag when it is packed the way you normally carry it. Use the deepest point at the bottom, not the widest point or the top of the bag.

  1. 1
    Load the bag

    Pack it with the gear you normally carry so the base sits in its real shape.

  2. 2
    Set it on a flat surface

    Let the bottom settle. Keep loose straps out of the way.

  3. 3
    Measure the depth

    Run the tape from front to back across the deepest part of the base.

The Ryzer Go attached across the bottom of a bag
The stand sits across the bottom of the bag. Measure the bag itself from front to back.
Step 2

Match your measurement to a depth.

The two ranges overlap, so many bags can use either depth. Both photos show the stand folded for travel. Use the chart above to measure and choose your depth.

Rear carry view of the 7-inch depth of the Ryzer Go mounted to a black commuter backpack with its legs folded for travel
7-inch depth

For bags 5.5 to 9.5 inches deep

7-inch travel view: the legs are folded flat against the bag. Choose this depth when the loaded bag measures inside the range. It is not assigned to one bag category.

Rear carry view of the 9-inch depth of the Ryzer Go mounted to a black backpack with its legs folded for travel
9-inch depth

For bags 8.5 to 12 inches deep

9-inch travel view: the legs are folded flat against the bag. Choose this depth when the loaded bag measures inside the range. Mojoh recommends it for disc golf bags.

8.5 to 9.5 inches
Both depths fit this overlap.

Pick the amount of platform coverage you prefer. If you want a second look, send us the measurement and a side photo of the packed bag.

The disc golf exception

The 7-inch depth can work on a disc golf bag, but Mojoh recommends the 9-inch depth.

Step 3

Check the rest of the fit.

Depth is the main choice. These three checks help confirm that the bag has a stable place for the stand.

10 to 16 in

Bag width

Both depths of the Ryzer Go fit bags approximately 10 to 16 inches wide.

Up to 50 lb

Loaded weight

Check the weight with the bag packed the way you use it.

Relatively flat base

Bottom shape

Backpacks need a relatively flat bottom that gives the mounting hardware a secure place to sit. Clamp pins create tiny pin holes.

Three alternative mounting hardware configurations for the Ryzer Go displayed separately
Three included ways to attach: clamps, hooks, or heavy-duty screws. Use whichever option fits your bag. The setup guide walks you through each one.
Still checking?

Send us the bag.

Email the front-to-back measurement and a side photo of the loaded bag. We will help confirm the fit.

Ask a bag fit question
Do I choose by bag type?

No. Almost every bag type can work with either depth when its measurements fall in the range. Measure the specific bag.

What if my bag is in the overlap?

Bags 8.5 to 9.5 inches deep can use either depth. Choose the platform coverage you prefer or send us a photo and measurement.

Which depth should disc golfers choose?

Mojoh recommends the 9-inch depth for disc golf bags. The 7-inch depth can still work.

Will there be a compatibility list?

Yes. We will add confirmed bag models as the list grows. Measurements remain the best way to choose today.

Ready to choose?

Take your measurement to the product page.

Shop the Ryzer Go