Opening mechanism
Both legs clear the frame
The close-up shows the handle motion and both spring-loaded legs opening without a bag attached.
Medic & EMS
The medic bag stand for first responders.
The Ryzer Go clamps to the bottom of your response bag and lifts it 13.7 inches off the ground. Roadside, field, sideline, or scene, your kit stands upright with every pocket visible and at reach, above whatever is on the pavement.
kit up, off the ground.
13.7″
off the ground
What is the Ryzer Go for medic bags?
It is a lightweight stand that clamps to the bottom of a first-in bag, trauma bag, or athletic training kit. Twist the handle and spring-loaded legs pop out to hold the bag upright, 13.7 inches off the ground. It carries bags up to 50 pounds and adds about 2.4 lb. Carry it open in landing mode, or manually fold the legs flat for the rig, storage, and tight spaces.
Holds response bags up to 50 pounds
Keeps your kit 13.7 inches above the pavement
Bag stands upright with pockets visible and at reach
Carry open in landing mode. Manually folds flat for the rig
See the deployment
Watch every setup video One twist puts the bag at working height.
The open motion shows exactly where the legs move and how the frame supports the loaded bag.
On scene
Why responders put their bag on a Ryzer.
Scenes can include wet pavement, broken glass, mud, or a crowded sideline. The Ryzer Go keeps a compatible kit upright and off the surface so its pockets remain easier to see and reach.
Fast
See every pocket
An upright bag shows you its pockets. Supplies come out by sight, which matters when seconds do.
13.7″
Above the scene
Road grime, glass, and standing water remain below the elevated bag. Choose a firm, stable placement before opening the kit.
1 twist
One-twist deployment
The stand lives on the bag and deploys with a single twist. Carry it open in landing mode, or manually fold it flat for the rig.
Twist to deploy
How the Ryzer Go works on a call.
Attach it to your bag once. Carry it open in landing mode, or manually fold the legs flat for the rig, storage, and tight spaces.
1
Attach it once
Clamp the Ryzer Go to the bottom of your response bag. The mounting pins create tiny pin holes and hold only the stand's own weight.
2
Twist to deploy
One twist pops the spring-loaded legs open. The bag stands upright next to the patient.
3
Work out of it
Supplies stay visible, organized, and 13.7 inches above the ground. Choose a firm, stable placement before opening the kit.
4
Carry open or fold flat
Carry it open in landing mode. Manually fold both legs flat for the rig, storage, or tight spaces.
Outfit your kit.
Extra attachment sets to move the Ryzer Go between bags, MOLLE hooks, grip strips, and more.
The numbers
Specs for the Ryzer Go.
13.7″
Lift off the ground
2.4 lb
Weight
7″ / 9″
Depth sizes
50 lb
Max bag weight
10–16″
Bag width it fits
5.5–12″
Bag depth across both sizes
Folds flat
Packs against the bag
Polymer + aluminum
Stainless steel hardware, padded back
Will it fit your bag?
What size do I need for a medic bag?
Measure the loaded bag front to back at the base. Choose the depth that contains that measurement. Bag style does not decide it.
7-inch depth
For loaded bags 5.5″ to 9.5″ deep
Choose this depth when the loaded bag's base falls in this range. Bag type does not decide the depth.
9-inch depth
For loaded bags 8.5″ to 12″ deep
Choose this depth by measurement. Bags from 8.5 to 9.5 inches deep can use either option.
Medic bag questions
Medic bag stand FAQ.
How do I keep my medic bag off the ground on scene?
Attach the Ryzer Go to the bottom of the bag. One twist pops out spring-loaded legs that hold the bag upright, 13.7 inches above wet pavement, glass, and mud, with every pocket visible.
Will it hold a loaded first-in or trauma bag?
The recommended maximum bag weight is 50 pounds. Weigh the loaded bag if you are unsure, and choose a firm, stable placement before opening the kit.
Does it slow down deployment?
No. The stand stays attached and deploys with a single twist. Carry it open in landing mode, or manually fold the legs flat for the rig, storage, and tight spaces.
Does it work with MOLLE-style bags?
Yes. The stand clamps to the base of the bag, and the MOLLE and D-Ring accessory set adds G-hooks and straps for webbing-covered bags. It fits bags 10 to 16 inches wide and 5.5 to 12 inches deep across the two sizes.
Can I move it between bags or rigs?
Yes. The clamps release without tools, and an extra attachment set lets you move the stand between a first-in bag and a training kit.
How much is the Ryzer Go and when does it ship?
The Ryzer Go website pre-order price is $79.99. Website pre-orders are expected to ship in early October 2026. Shipping is calculated at checkout.
Pre-order now live
Keep your kit off the pavement.
Reserve the Ryzer Go at $79.99. Website pre-orders are expected to ship early October 2026.
Fully funded on Kickstarter in 2 hours · 1,200+ backers