Attach once
Four mounting points hold the frame
Center the stand at the base of the loaded bag, secure the clamp and strap, and leave it attached between shoots.
Camera & video
The camera bag stand for working shooters.
The Ryzer Go clamps to the bottom of your camera bag and lifts it 13.7 inches off the ground. Production days, news, location shoots, run-and-gun. Your glass stays out of the wet grass and every lens is at reach without kneeling on concrete.
your glass off the ground.
13.7″
off the ground
What is the Ryzer Go for camera bags?
It is a lightweight stand that clamps to the bottom of a camera backpack or shoulder bag. Twist the handle and spring-loaded legs pop out to hold the bag upright, 13.7 inches off the ground. It holds up to 50 pounds of bodies and glass and adds about 2.4 lb. Carry it open in landing mode, or manually fold the legs flat for vehicles, storage, travel, and tight spaces.
Holds camera bags up to 50 pounds
Keeps gear 13.7 inches above wet grass, sand, and mud
Bag stays upright, so lens swaps happen at reach
Landing mode or manual fold-flat carry at about 2.4 lb
See the attachment
Watch every setup video The mounting points, shown clearly.
See how the clamp and strap secure the Ryzer Go to a bag without covering the frame or legs.
watch & learn
Watch it with camera bags.
Real walkthroughs with photography gear, straight from the workshop.
How the Ryzer Go works with rear-opening clamshell camera bags
Open the back of the bag at working height without laying it in the dirt.
Attaching the Coalax Lancer 300
Step by step on the 9 inch Ryzer Go.
On location
Why shooters put their bag on a Ryzer.
Locations rarely come with a table. The field shoot is on wet grass, the b-roll is on a muddy trail, the presser is on a sidewalk. The Ryzer Go turns wherever you are standing into a workstation your gear can live on.
Dry
Keep gear off the ground
Wet grass, dew, sand, and dust stay below the bag instead of directly under your camera bodies and lenses.
Swap
Faster lens changes
The bag stands upright with compartments facing you. Swap glass at reach instead of kneeling over a bag lying flat in the dirt.
Move
Made for run-and-gun
Carry it open in landing mode for the next nearby setup, or manually fold it flat for the vehicle, travel, storage, or tight spaces.
Twist to deploy
How the Ryzer Go works on a shoot.
Attach it to your bag once. Carry it open in landing mode, or manually fold the legs flat for vehicles, storage, travel, and tight spaces.
1
Attach it once
Clamp the Ryzer Go to the bottom of your camera bag. The mounting pins create tiny pin holes and hold only the stand's own weight.
2
Twist to deploy
A quick twist pops the spring-loaded legs open. Your bag stands upright next to your tripod.
3
Shoot out of it
Lenses, batteries, and cards sit at reach, 13.7 inches above the ground, through the whole setup. Choose a firm, stable placement before opening the bag.
4
Carry open or fold flat
Use landing mode for a nearby setup. Manually fold both legs flat for the vehicle, travel, storage, or tight spaces.
Round out the kit.
Extra attachment sets to move the Ryzer Go between bags, grip strips, compact legs, and more.
The numbers
Specs for the Ryzer Go.
13.7″
Lift off the ground
2.4 lb
Weight
7″ / 9″
Depth sizes
50 lb
Max bag weight
10–16″
Bag width it fits
5.5–12″
Bag depth across both sizes
Folds flat
Packs against the bag
Polymer + aluminum
Stainless steel hardware, padded back
Will it fit your bag?
What size do I need for a camera bag?
Measure the loaded bag front to back at the base. Choose the depth that contains that measurement. Bag style does not decide it.
7-inch depth
For loaded bags 5.5″ to 9.5″ deep
Choose this depth when the loaded bag's base falls in this range. Bag type does not decide the depth.
9-inch depth
For loaded bags 8.5″ to 12″ deep
Choose this depth by measurement. Bags from 8.5 to 9.5 inches deep can use either option.
Camera bag questions
Camera bag stand FAQ.
How do I keep my camera bag off the ground?
Attach the Ryzer Go to the bottom of the bag. A quick twist pops out spring-loaded legs that hold the bag upright, 13.7 inches off wet grass, sand, or concrete, with your gear at reach.
Will it hold a loaded camera backpack?
The recommended maximum bag weight is 50 pounds. Weigh the loaded bag if you are unsure, and choose a firm, stable placement before opening it.
Can I swap lenses while the bag is on the stand?
That is the best part. The bag stands upright at 13.7 inches with the compartments facing you, so you swap glass at reach instead of kneeling over a bag in the dirt.
Does it fit shoulder bags or just backpacks?
Both, as long as the bag has a base the clamps can grab. It fits bags 10 to 16 inches wide and 5.5 to 12 inches deep across the two sizes.
How do I carry it between setups?
Carry it open in landing mode, or manually fold the legs flat against the bag for vehicles, storage, travel, and tight spaces. It stays attached and adds about 2.4 pounds.
How much is the Ryzer Go and when does it ship?
The Ryzer Go website pre-order price is $79.99. Website pre-orders are expected to ship in early October 2026. Shipping is calculated at checkout.
Pre-order now live
Get your glass off the ground.
Reserve the Ryzer Go at $79.99. Website pre-orders are expected to ship in early October 2026.
Fully funded on Kickstarter in 2 hours · 1,200+ backers